Dragon Armour is an innovative and revolutionary new fire & heat resistant product that is vastly superior to any competitive product on the market and is being offered by WEBBERTEK, LLC. This amazing material is the combination of several natural items. Using a proprietary process, the material’s properties are extremely enhanced resulting in an amazingly temperature resistance and fire proof light-weight, thin material with no smoke or hazardous by-products being produced when subjected to a flame. Dragon Armour has the physical appearance of a light colored paint. Dragon Armour has proven to have an enormous “R” value properties keeping temperatures stable when subjected to temperatures at 200 degrees F. In applications using Dragon Armour at 1/2” in thickness and it can resist heat transfer of over 5,000 degrees F. for over 10 minutes with a direct open flame being applied directly to it. The Dragon Armour product is non-hazardous, producing no poisons or noxious flumes.
In this video, we have covered a piece of corrugated paper with a coating of Dragon Armour and placed a cutting torch directly on it. At about 55 seconds into the video you’ll see us put a digital thermometer on the back of the paper and it only reads 170°. A few moments later our tester puts his hand on the backside of the paper to show the reading is accurate.
Without Dragon Armour, the panel starts to warp, bend, and lose rigidity almost immediately after the heat source is applied. You’ll also notice black smoke being emitted from the burn.
With Dragon Armour in the middle, you’ll notice the shape of the panel holds its integrity without warping. You’ll also notice that the panel does not emit black smoke as the untreated panel did.
After holding the flame on each panel for minutes, you’ll notice the Dragon Armour panel is still structurally sound. The Dragon Armour also has the added benefit of adding sound suppression to the panel.
In this video, we have covered a piece of DAX-Foam with Dragon Armour and placed it in front of a torch. DAX-Foam is notorious for disintegrating quickly when a flame is applied to it, but our video shows that with a coat of Dragon Armour, the DAX-Foam resists the flame and keeps itself intact. You’ll notice only very small pieces of the foam and coating rolling off.
After 15 minutes of continuous 5000 degree flame, the plastic spoon did not show any signs of distortion. The plastic spoon had a temperature of 99° throughout the burn thus resulting in no warping or distortion.
- Material contain no Asbestos, Halogenated Solvents, Heavy Metals, Chemicals or Silicates.
- Material can be easily applied by brush or spray
- Material is made from Natural Earth Products
- Color – Light Ivory
- V.O.C or S.V.O.C – 0%
- Solids by Volume – 75%
- Specific Gravity – 1.90 +/- 0.05 g/cc
- Drying Time – @ 77 degrees F & 50% R.H to touch 1 to 2 hours @ 1 – 3 mil thick
- Flash Point – None
- Type of Cure – Coalescence
- Reduce or Cleaning – Water
- Shelf Life – 1 year in unopened container and stored at 10 – 27 degrees C. (50 – 80 degrees F )
- Gallon Container Weight – 65 lbs.
- Packaging – 5 & 55 gallon containers
Dragon Armour is a thick mud-like substance that can be applied to various objects within various industries. The tests in the videos above show the versatility and resilience of Dragon Armour when applied to objects and then subjected to heat.
405 – 409 – 7111